openSUSE16.1 : Nagios Server

Nagios Server, open-source integrated monitoring software

Nagios is an open-source monitoring solution that runs on Linux.
Nagios was developed by Ethan Galstad and first released in 1999. Subsequently, the project was enhanced as an open-source project by several contributors.

Nagios is designed to periodically check critical parameters of networks, applications, or servers. These parameters include microprocessor load, number of running processes, log files, disk and memory usage, as well as many other services such as SMTP (Simple Mail Transfer Protocol), HTTP (Hypertext Transfer Protocol), and POP3 (Post Office Protocol 3).

To run Nagois, you need PHP, a database such as MySQL, and a web server such as Apache or Nginx. This time, we will proceed assuming all of these are already configured.

1.Nagios Installation

# zypper -n install nagios

2. Creating Nagios Web Users

Create a user account to access the Nagios Web dashboard. This user account is used for authentication.
The default user name is nagiosadmin, defined as the preferred user name within the /etc/nagios/cgi.cfg file.

# htpasswd -c /etc/nagios/htpasswd.users nagiosadmin
New password:  [password]
Re-type new password:  [again password]
Adding password for user nagiosadmin

Set ownership and permissions

# chown wwwrun:wwwrun /etc/nagios/htpasswd.users
# chmod 640 /etc/nagios/htpasswd.users

Restart Apache

# systemctl restart apache2

Open the HTTP service port in the firewall.

# firewall-cmd --add-service=http --permanent
# firewall-cmd --reload

Create the necessary directories and set ownership.

# mkdir /var/lib/nagios/rw/
# chown -R nagios:nagios /var/lib/nagios/rw/

Editing Nagios Systemd Services
Add Type=forking to [Service]

# vi /usr/lib/systemd/system/nagios.service

[Unit]
Description=Network Monitor Nagios
After=syslog.target network.target

[Service]
# for details of the additional system hardening configuration please see
# https://en.opensuse.org/openSUSE:Security_Features#Systemd_hardening_effort
ProtectSystem=full
ProtectHome=true
ProtectHostname=true
ProtectKernelTunables=true
ProtectKernelModules=true
ProtectControlGroups=true
RestrictRealtime=true
# end of system hardening
ExecStartPre=/usr/sbin/nagios -v /etc/nagios/nagios.cfg
ExecStart=/usr/sbin/nagios /etc/nagios/nagios.cfg
ExecStopPost=/usr/bin/rm -f /var/spool/nagios/nagios.cmd
ExecReload=/usr/sbin/nagios -v /etc/nagios/nagios.cfg
ExecReload=kill -HUP $MAINPID
Type=forking ←Additional

[Install]
WantedBy=multi-user.target
Alias=monitoring_daemon.service

Start and Enable Nagios Services

# systemctl daemon-reload
# systemctl enable nagios --now
Created symlink '/etc/systemd/system/monitoring_daemon.service' → '/usr/lib/systemd/system/nagios.service'.
Created symlink '/etc/systemd/system/multi-user.target.wants/nagios.service' → '/usr/lib/systemd/system/nagios.service'.

Restart the system

# shutdown -r now

Verify that the service is running

# systemctl status nagios

● nagios.service - Network Monitor Nagios
     Loaded: loaded (/usr/lib/systemd/system/nagios.service; enabled; preset: disabled)
     Active: active (running) since Tue 2026-11-17 17:33:59 JST; 1min 55s ago
 Invocation: f87c64e8b3b84b3d898303643df63d55
    Process: 2250 ExecStartPre=/usr/sbin/nagios -v /etc/nagios/nagios.cfg (code=exited, status=0/SUCCESS)
   Main PID: 2251 (nagios)
      Tasks: 6 (limit: 2229)
        CPU: 123ms
     CGroup: /system.slice/nagios.service
             ├─2251 /usr/sbin/nagios /etc/nagios/nagios.cfg
             ├─2253 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
             ├─2254 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
             ├─2255 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
             ├─2256 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
             └─2257 /usr/sbin/nagios /etc/nagios/nagios.cfg

Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2254;pid=2254
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2254;pid=2254
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2255;pid=2255
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2255;pid=2255
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2253;pid=2253
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2253;pid=2253
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2256;pid=2256
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2256;pid=2256
Nov 17 17:33:59 Lepard nagios[2251]: Successfully launched command file worker with pid 2257
Nov 17 17:33:59 Lepard nagios[2251]: Successfully launched command file worker with pid 2257

3. Access the Nagios Web Interface

Access http://[IP_Address]/nagios/ in any browser. Enter nagiosadmin for [Username] and the password you specified when creating the user above for [Password], then click [Sign in].

After successfully logging in, the following dashboard will be displayed.

Display host availability
Click [Hosts] in the left menu

Click [Tactical Overview] in the left menu to view monitoring data.

Click [Current Status] [Services] in the left menu.

※ If you have assigned SSH port 2244 with custom settings, change localhost.cfg as follows:

# vi /etc/nagios/objects/localhost.cfg
Per Line 143 :
check_command           check_ssh
↓
check_command           check_ssh!-p 2244
# systemctl restart nagios

4. Configuring the Nagios Agent

What is required to monitor agents
Nagios plugins for data collection
NRPE Agent to execute the plugins

4.1 Nagios plugins

Nagios plugins are located in the /usr/lib/nagios/plugins directory. To list all plugins available on the system, list this directory

# ls /usr/lib/nagios/plugins

The following nagios-plugins are available:

check_breeze    check_flexlm        check_load      check_nwstat       check_sensors  check_users
check_by_ssh    check_ftp           check_log       check_oracle       check_simap    check_wave
check_clamd     check_host          check_mailq     check_overcr       check_smtp     negate
check_cluster   check_http          check_mrtg      check_ping         check_spop     process_perfdata.pl
check_dhcp      check_icmp          check_mrtgtraf  check_pnp_rrds.pl  check_ssh      rrd_convert.pl
check_dig       check_ide_smart     check_nntp      check_pop          check_ssmtp    rrd_modify.pl
check_disk      check_ifoperstatus  check_nntps     check_procs        check_swap     urlize
check_disk_smb  check_ifstatus      check_nt        check_procs_perf   check_tcp      utils.pm
check_dns       check_imap          check_ntp       check_real         check_time     utils.sh
check_dummy     check_ircd          check_ntp_peer  check_rpc          check_udp
check_file_age  check_jabber        check_ntp_time  check_rta_multi    check_ups

4.2 Installing the Nagios NRPE Agent

# zypper -n install nrpe

Version Check

# nrpe -V
NRPE - Nagios Remote Plugin Executor
Version: 4.1.1

Start the service and enable it

# systemctl enable --now nrpe.service

Check the status of the NRPE agent

# systemctl status nrpe
● nrpe.service - Nagios Remote Plugin Executor
     Loaded: loaded (/usr/lib/systemd/system/nrpe.service; enabled; preset: disabled)
     Active: active (running) since Wed 2026-11-18 16:17:23 JST; 28s ago
 Invocation: 2a4a0858a97f4b2a985f006a1abbfe81
       Docs: http://www.nagios.org/documentation
   Main PID: 3126 (nrpe)
      Tasks: 1 (limit: 2229)
        CPU: 141ms
     CGroup: /system.slice/nrpe.service
             └─3126 /usr/sbin/nrpe -c /etc/nrpe.cfg -f

Nov 18 16:17:23 Lepard systemd[1]: Started Nagios Remote Plugin Executor.
Nov 18 16:17:24 Lepard nrpe[3126]: Starting up daemon
Nov 18 16:17:24 Lepard nrpe[3126]: Server listening on 0.0.0.0 port 5666.
Nov 18 16:17:24 Lepard nrpe[3126]: socket: Address family not supported by protocol
Nov 18 16:17:24 Lepard nrpe[3126]: Listening for connections on port 5666
Nov 18 16:17:24 Lepard nrpe[3126]: Allowing connections from: 127.0.0.1,::1

socket: Address family not supported by protocol
The message "IPv6 related" appears, but since we are not using IPv6 this time, we will ignore it and proceed.

Open the NRPE port on the firewall
NRPE uses TCP port 5666 by default. If a firewall is in operation, open this port to allow external checks from the Nagios monitoring server.

# firewall-cmd --add-port=5666/tcp --permanent
# firewall-cmd --reload

Verify that port 5666/tcp is listening.

#  ss -altnp | grep 5666
LISTEN 0      5            0.0.0.0:5666      0.0.0.0:*    users:(("nrpe",pid=3126,fd=4)) 

5. Add Monitoring Host

Add the following server as a host and configure it as a target for simple ping-based availability monitoring.
OS : openSUSE16.1
IP address : 192.168.11.85

5.1 Editing Configuration Files

# vi /etc/nagios/nagios.cfg
Line 51 : Uncomments
cfg_dir=/etc/nagios/servers

5.2 Directory Creation

# mkdir /etc/nagios/servers
# chgrp nagios /etc/nagios/servers
# chmod 750 /etc/nagios/servers

5.3 Create New Definition File(korodes in korodes.cfg is any name)

# vi /etc/nagios/servers/korodes.cfg

define host {
    use                     linux-server
    host_name               korodes
    alias                   korodes
    address                 192.168.11.85
}
define service {
    use                     generic-service
    host_name               korodes
    service_description     PING
    check_command           check_ping!100.0,20%!500.0,60%
}

5.4 Nagios Server Restart

# systemctl restart nagios.service

Log in to the Nagios server (http://[server IP address]/nagios) and view Hosts to see that the host has been added.

6. Add Monitoring Service

Add the monitoring service to the host added above.
OS : openSUSE16.1
IP address : 192.168.11.85

6.1 Settings on the monitored server

6.1.1 Install the agent on the monitored host

# zypper -n  install nagios-nrpe nagios-plugins-all

6.1.2 Editing Configuration Files

# vi /etc/nrpe.cfg

Line 106: Add hosts to allow connections (specify Nagios server)
allowed_hosts=127.0.0.1,::1,192.168.11.83

Line 122: Allow command arguments
dont_blame_nrpe=1

Lines 300-304: Commented out and added
# command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
# command[check_load]=/usr/lib/nagios/plugins/check_load -r -w .15,.10,.05 -c .30,.25,.20
# command[check_hda1]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
# command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
# command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200

Add the following
command[check_by_ssh]=/usr/lib/nagios/plugins/check_by_ssh $ARG1$
command[check_dhcp]=/usr/lib/nagios/plugins/check_dhcp $ARG1$
command[check_disk]=/usr/lib/nagios/plugins/check_disk $ARG1$
command[check_file_age]=/usr/lib/nagios/plugins/check_file_age $ARG1$
command[check_ftp]=/usr/lib/nagios/plugins/check_ftp $ARG1$
command[check_http]=/usr/lib/nagios/plugins/check_http $ARG1$
command[check_imap]=/usr/lib/nagios/plugins/check_imap $ARG1$
command[check_load]=/usr/lib/nagios/plugins/check_load $ARG1$
command[check_log]=/usr/lib/nagios/plugins/check_log $ARG1$
command[check_mysql]=/usr/lib/nagios/plugins/check_mysql $ARG1$
command[check_ntp]=/usr/lib/nagios/plugins/check_ntp $ARG1$
command[check_ntp_peer]=/usr/lib/nagios/plugins/check_ntp_peer $ARG1$
command[check_ntp_time]=/usr/lib/nagios/plugins/check_ntp_time $ARG1$
command[check_ping]=/usr/lib/nagios/plugins/check_ping $ARG1$
command[check_pop]=/usr/lib/nagios/plugins/check_pop $ARG1$
command[check_spop]=/usr/lib/nagios/plugins/check_spop $ARG1$
command[check_procs]=/usr/lib/nagios/plugins/check_procs $ARG1$
command[check_smtp]=/usr/lib/nagios/plugins/check_smtp $ARG1$
command[check_ssmtp]=/usr/lib/nagios/plugins/check_ssmtp $ARG1$
command[check_ssh]=/usr/lib/nagios/plugins/check_ssh $ARG1$
command[check_swap]=/usr/lib/nagios/plugins/check_swap $ARG1$
command[check_tcp]=/usr/lib/nagios/plugins/check_tcp $ARG1$
command[check_udp]=/usr/lib/nagios/plugins/check_udp $ARG1$
command[check_ups]=/usr/lib/nagios/plugins/check_ups $ARG1$
command[check_users]=/usr/lib/nagios/plugins/check_users $ARG1$

6.1.3 Enable and start the NRPE server

# systemctl enable --now nrpe
# systemctl start nrpe

# systemctl status nrpe
● nrpe.service - Nagios Remote Plugin Executor
     Loaded: loaded (/usr/lib/systemd/system/nrpe.service; enabled; preset: disabled)
     Active: active (running) since Wed 2026-11-18 16:49:13 JST; 1min 8s ago
 Invocation: 492e8d0f99f546eaaa84ebb5095dce7a
       Docs: http://www.nagios.org/documentation
   Main PID: 2935 (nrpe)
      Tasks: 1 (limit: 4567)
        CPU: 46ms
     CGroup: /system.slice/nrpe.service
             └─2935 /usr/sbin/nrpe -c /etc/nrpe.cfg -f

Nov 18 16:49:13 Lion systemd[1]: Started Nagios Remote Plugin Executor.
Nov 18 16:49:13 Lion nrpe[2935]: Starting up daemon
Nov 18 16:49:13 Lion nrpe[2935]: Server listening on 0.0.0.0 port 5666.
Nov 18 16:49:13 Lion nrpe[2935]: Server listening on :: port 5666.
Nov 18 16:49:13 Lion nrpe[2935]: Warning: Daemon is configured to accept command arguments from clients!
Nov 18 16:49:13 Lion nrpe[2935]: Listening for connections on port 5666
Nov 18 16:49:13 Lion nrpe[2935]: Allowing connections from: 127.0.0.1,::1,192.168.11.83

6.1.4 Open NRPE ports 5666/tcp and 5666/udp on the firewall.

# firewall-cmd --permanent --add-port=5666/tcp
# firewall-cmd --permanent --add-port=5666/udp
# firewall-cmd --reload
6.2 Nagios Server-Side Configuration

6.2.1 Editing commands.cfg

# vi /etc/nagios/objects/commands.cfg
 
# Add to the last line
define command {
    command_name    check_nrpe
    command_line    $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}

6.2.2 Edit and add to the korodes.cfg file created when adding the host earlier.
This time, let's add HTTP, SSH, and FTP.

# vi /etc/nagios/servers/korodes.cfg
 
# Add the following:
 
# 'HTTP' command definition
define service{
        use                              local-service
        host_name                        korodes
        service_description              HTTP
        check_command                    check_http
        }
# 'SSH' command definition
define service{
        use                              local-service
        host_name                        korodes
        service_description              SSH
        check_command                    check_ssh
       }
# 'FTP' command definition
define service{
        use                              local-service
        host_name                        korodes
        service_description              FTP
        check_command                    check_ftp
        }

6.2.3 Nagios Restart

# systemctl restart nagios.service

6.2.4 Access http://[Nagios Server IP Address]/nagios
The newly added monitoring service appears as shown in the figure below