オープンソースの統合監視ソフトウェア「Nagios Server」
Nagiosは、Linux 上で実行するオープンソースの監視ソリューションです。
Nagiosは、 Ethan Galstadによって開発され、 1999 年に最初にリリースされました。その後、このプロジェクトは、いくつかの貢献者によってオープンソース プロジェクトとして改良されました。
Nagiosは、ネットワーク、アプリケーション、またはサーバーの重要なパラメーターを定期的にチェックするように設計されています。これらのパラメータには、マイクロプロセッサの負荷、実行中のプロセス数、ログ ファイル、ディスクおよびメモリの使用量の他、SMTP (Simple Mail Transfer Protocol)、HTTP (Hypertext Transfer Protocol)、POP3 ( Post Office Protocol 3)の他の多くのサービスもチェックできます。
Nagoisを実行するにはPHP、MySQLなどのデータベース、ApacheやNginxなどのWebサーバーが必要です。今回はこれらすべてが構成済みという前提で進めます。
1.Nagios インストール
# zypper -n install nagios
2. Nagios Web ユーザーの作成
Nagios Web ダッシュボードにアクセスするためのユーザー アカウントを作成する。このユーザーアカウントは、認証に使用される。
ユーザーのデフォルト名はnagiosadminで、/etc/nagios/cgi.cfgファイル内に優先ユーザー名として定義されています。
# htpasswd -c /etc/nagios/htpasswd.users nagiosadmin
New password: [password]
Re-type new password: [again password]
Adding password for user nagiosadmin
所有権と権限を設定
# chown wwwrun:wwwrun /etc/nagios/htpasswd.users
# chmod 640 /etc/nagios/htpasswd.users
Apache を再起動
# systemctl restart apache2
ファイアウォールで HTTP サービスポートを解放します
# firewall-cmd --add-service=http --permanent
# firewall-cmd --reload
必要なディレクトリーを作成し所有権を設定する
# mkdir /var/lib/nagios/rw/
# chown -R nagios:nagios /var/lib/nagios/rw/
nagios sysytemdサービスの編集
[Service]にType=forkingを追加する
# vi /usr/lib/systemd/system/nagios.service
[Unit]
Description=Network Monitor Nagios
After=syslog.target network.target
[Service]
# for details of the additional system hardening configuration please see
# https://en.opensuse.org/openSUSE:Security_Features#Systemd_hardening_effort
ProtectSystem=full
ProtectHome=true
ProtectHostname=true
ProtectKernelTunables=true
ProtectKernelModules=true
ProtectControlGroups=true
RestrictRealtime=true
# end of system hardening
ExecStartPre=/usr/sbin/nagios -v /etc/nagios/nagios.cfg
ExecStart=/usr/sbin/nagios /etc/nagios/nagios.cfg
ExecStopPost=/usr/bin/rm -f /var/spool/nagios/nagios.cmd
ExecReload=/usr/sbin/nagios -v /etc/nagios/nagios.cfg
ExecReload=kill -HUP $MAINPID
Type=forking ←追加
[Install]
WantedBy=multi-user.target
Alias=monitoring_daemon.service
Nagios サービスを開始と有効
# systemctl daemon-reload
# systemctl enable nagios --now
Created symlink '/etc/systemd/system/monitoring_daemon.service' → '/usr/lib/systemd/system/nagios.service'.
Created symlink '/etc/systemd/system/multi-user.target.wants/nagios.service' → '/usr/lib/systemd/system/nagios.service'.
システムを再起動
# shutdown -r now
サービスが実行しているか確認
# systemctl status nagios
● nagios.service - Network Monitor Nagios
Loaded: loaded (/usr/lib/systemd/system/nagios.service; enabled; preset: disabled)
Active: active (running) since Tue 2026-11-17 17:33:59 JST; 1min 55s ago
Invocation: f87c64e8b3b84b3d898303643df63d55
Process: 2250 ExecStartPre=/usr/sbin/nagios -v /etc/nagios/nagios.cfg (code=exited, status=0/SUCCESS)
Main PID: 2251 (nagios)
Tasks: 6 (limit: 2229)
CPU: 123ms
CGroup: /system.slice/nagios.service
├─2251 /usr/sbin/nagios /etc/nagios/nagios.cfg
├─2253 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
├─2254 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
├─2255 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
├─2256 /usr/sbin/nagios --worker /var/lib/nagios/nagios.qh
└─2257 /usr/sbin/nagios /etc/nagios/nagios.cfg
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2254;pid=2254
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2254;pid=2254
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2255;pid=2255
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2255;pid=2255
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2253;pid=2253
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2253;pid=2253
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2256;pid=2256
Nov 17 17:33:59 Lepard nagios[2251]: wproc: Registry request: name=Core Worker 2256;pid=2256
Nov 17 17:33:59 Lepard nagios[2251]: Successfully launched command file worker with pid 2257
Nov 17 17:33:59 Lepard nagios[2251]: Successfully launched command file worker with pid 2257
3. Nagios Web インターフェイスにアクセス
任意のブラウザで http://[IP_Address]/nagios/にアクセスし[Username]にnagiosadmin、[Password]には上記でユーザーを作成したとき指定したパスワードを入力し、[Sign in]

ログインに成功すると、以下のダッシュボードが表示されます。

ホストの可用性を表示
左メニューの[Hosts]をクリック

左メニューの [Tactical Overview] をクリックすると監視データを閲覧できる

左メニューの [Current Status] [Services] をクリック

※ SSHポートをカスタム設定で2244を割り当てている場合は下記の通りlocalhost.cfgを変更しておきます
# vi /etc/nagios/objects/localhost.cfg
143行目当たり
check_command check_ssh
↓
check_command check_ssh!-p 2244
# systemctl restart nagios
4. Nagios エージェントの構成
エージェントを監視するために必要なもの
• データ収集用のNagios plugins
• プラグインを実行するNRPE Agent
4.1 Nagios plugins
Nagios プラグインは、/usr/lib/nagios/plugins ディレクトリにあります。システム内で使用可能なすべてのプラグインを表示するには、このディレクトリをリストします。
# ls /usr/lib/nagios/plugins
下記のとおりnagios-pluginsが利用可能である
check_breeze check_flexlm check_load check_nwstat check_sensors check_users
check_by_ssh check_ftp check_log check_oracle check_simap check_wave
check_clamd check_host check_mailq check_overcr check_smtp negate
check_cluster check_http check_mrtg check_ping check_spop process_perfdata.pl
check_dhcp check_icmp check_mrtgtraf check_pnp_rrds.pl check_ssh rrd_convert.pl
check_dig check_ide_smart check_nntp check_pop check_ssmtp rrd_modify.pl
check_disk check_ifoperstatus check_nntps check_procs check_swap urlize
check_disk_smb check_ifstatus check_nt check_procs_perf check_tcp utils.pm
check_dns check_imap check_ntp check_real check_time utils.sh
check_dummy check_ircd check_ntp_peer check_rpc check_udp
check_file_age check_jabber check_ntp_time check_rta_multi check_ups
4.2 Nagios NRPE Agentのインストール
# zypper -n install nrpe
バージョン確認
# nrpe -V
NRPE - Nagios Remote Plugin Executor
Version: 4.1.1
サービスを開始して有効にする
# systemctl enable --now nrpe.service
NRPEエージェントのステータスを確認
# systemctl status nrpe
● nrpe.service - Nagios Remote Plugin Executor
Loaded: loaded (/usr/lib/systemd/system/nrpe.service; enabled; preset: disabled)
Active: active (running) since Wed 2026-11-18 16:17:23 JST; 28s ago
Invocation: 2a4a0858a97f4b2a985f006a1abbfe81
Docs: http://www.nagios.org/documentation
Main PID: 3126 (nrpe)
Tasks: 1 (limit: 2229)
CPU: 141ms
CGroup: /system.slice/nrpe.service
└─3126 /usr/sbin/nrpe -c /etc/nrpe.cfg -f
Nov 18 16:17:23 Lepard systemd[1]: Started Nagios Remote Plugin Executor.
Nov 18 16:17:24 Lepard nrpe[3126]: Starting up daemon
Nov 18 16:17:24 Lepard nrpe[3126]: Server listening on 0.0.0.0 port 5666.
Nov 18 16:17:24 Lepard nrpe[3126]: socket: Address family not supported by protocol
Nov 18 16:17:24 Lepard nrpe[3126]: Listening for connections on port 5666
Nov 18 16:17:24 Lepard nrpe[3126]: Allowing connections from: 127.0.0.1,::1
socket: Address family not supported by protocol というメッセージが表示されますが、どうもIPv6関連だと思いますが今回はIPv6は使用しておりませんので無視をして進めます
ファイアウォールでNRPEのポートを開く
NRPEはデフォルトでTCP 5666ポートを使用します。ファイアウォールが動作している場合は、Nagiosモニタリングサーバーからの外部チェックを許可するために、このポートを開きます。
# firewall-cmd --add-port=5666/tcp --permanent
# firewall-cmd --reload
ポート5666/tcpがリッスンされているか確認
# ss -altnp | grep 5666
LISTEN 0 5 0.0.0.0:5666 0.0.0.0:* users:(("nrpe",pid=3126,fd=4))
5. 監視ホストの追加
下記サーバーをホストに追加し、 単純なPing による死活監視対象として設定
OS : openSUSE16.1
IPアドレス : 192.168.11.85
5.1 設定ファイル編集
# vi /etc/nagios/nagios.cfg
51行目
cfg_dir=/etc/nagios/servers コメント解除
5.2 ディレクトリー作成
# mkdir /etc/nagios/servers
# chgrp nagios /etc/nagios/servers
# chmod 750 /etc/nagios/servers
5.3 定義ファイル新規作成(korodes.cfgのkorodesは任意の名称)
# vi /etc/nagios/servers/korodes.cfg
define host {
use linux-server
host_name korodes
alias korodes
address 192.168.11.85
}
define service {
use generic-service
host_name korodes
service_description PING
check_command check_ping!100.0,20%!500.0,60%
}
5.4 Nagiosサーバー再起動
# systemctl restart nagios.service
Nagios サーバーにログイン(http://[サーバーIPアドレス]/nagios)しHostsを見るとホストが追加されている

6. 監視サービスの追加
上記で追加したホストに監視サービスを追加する
OS : openSUSE16.1
IPアドレス : 192.168.11.85
6.1 監視対象サーバー側の設定
6.1.1 監視対象ホストにエージェントをインストール
# zypper -n install nagios-nrpe nagios-plugins-all
6.1.2 設定ファイル編集
# vi /etc/nrpe.cfg
106行目 : 接続を許可するホストを追記 (Nagios サーバーを指定)
allowed_hosts=127.0.0.1,::1,192.168.11.83
122行目 : コマンドの引数を許可
dont_blame_nrpe=1
300-304行目コメントにし、追加
# command[check_users]=/usr/lib/nagios/plugins/check_users -w 5 -c 10
# command[check_load]=/usr/lib/nagios/plugins/check_load -r -w .15,.10,.05 -c .30,.25,.20
# command[check_hda1]=/usr/lib/nagios/plugins/check_disk -w 20% -c 10% -p /dev/hda1
# command[check_zombie_procs]=/usr/lib/nagios/plugins/check_procs -w 5 -c 10 -s Z
# command[check_total_procs]=/usr/lib/nagios/plugins/check_procs -w 150 -c 200
下記を追加
command[check_by_ssh]=/usr/lib/nagios/plugins/check_by_ssh $ARG1$
command[check_dhcp]=/usr/lib/nagios/plugins/check_dhcp $ARG1$
command[check_disk]=/usr/lib/nagios/plugins/check_disk $ARG1$
command[check_file_age]=/usr/lib/nagios/plugins/check_file_age $ARG1$
command[check_ftp]=/usr/lib/nagios/plugins/check_ftp $ARG1$
command[check_http]=/usr/lib/nagios/plugins/check_http $ARG1$
command[check_imap]=/usr/lib/nagios/plugins/check_imap $ARG1$
command[check_load]=/usr/lib/nagios/plugins/check_load $ARG1$
command[check_log]=/usr/lib/nagios/plugins/check_log $ARG1$
command[check_mysql]=/usr/lib/nagios/plugins/check_mysql $ARG1$
command[check_ntp]=/usr/lib/nagios/plugins/check_ntp $ARG1$
command[check_ntp_peer]=/usr/lib/nagios/plugins/check_ntp_peer $ARG1$
command[check_ntp_time]=/usr/lib/nagios/plugins/check_ntp_time $ARG1$
command[check_ping]=/usr/lib/nagios/plugins/check_ping $ARG1$
command[check_pop]=/usr/lib/nagios/plugins/check_pop $ARG1$
command[check_spop]=/usr/lib/nagios/plugins/check_spop $ARG1$
command[check_procs]=/usr/lib/nagios/plugins/check_procs $ARG1$
command[check_smtp]=/usr/lib/nagios/plugins/check_smtp $ARG1$
command[check_ssmtp]=/usr/lib/nagios/plugins/check_ssmtp $ARG1$
command[check_ssh]=/usr/lib/nagios/plugins/check_ssh $ARG1$
command[check_swap]=/usr/lib/nagios/plugins/check_swap $ARG1$
command[check_tcp]=/usr/lib/nagios/plugins/check_tcp $ARG1$
command[check_udp]=/usr/lib/nagios/plugins/check_udp $ARG1$
command[check_ups]=/usr/lib/nagios/plugins/check_ups $ARG1$
command[check_users]=/usr/lib/nagios/plugins/check_users $ARG1$
6.1.3 nrpeサーバー有効化、起動
# systemctl enable --now nrpe
# systemctl start nrpe
# systemctl status nrpe
● nrpe.service - Nagios Remote Plugin Executor
Loaded: loaded (/usr/lib/systemd/system/nrpe.service; enabled; preset: disabled)
Active: active (running) since Wed 2026-11-18 16:49:13 JST; 1min 8s ago
Invocation: 492e8d0f99f546eaaa84ebb5095dce7a
Docs: http://www.nagios.org/documentation
Main PID: 2935 (nrpe)
Tasks: 1 (limit: 4567)
CPU: 46ms
CGroup: /system.slice/nrpe.service
└─2935 /usr/sbin/nrpe -c /etc/nrpe.cfg -f
Nov 18 16:49:13 Lion systemd[1]: Started Nagios Remote Plugin Executor.
Nov 18 16:49:13 Lion nrpe[2935]: Starting up daemon
Nov 18 16:49:13 Lion nrpe[2935]: Server listening on 0.0.0.0 port 5666.
Nov 18 16:49:13 Lion nrpe[2935]: Server listening on :: port 5666.
Nov 18 16:49:13 Lion nrpe[2935]: Warning: Daemon is configured to accept command arguments from clients!
Nov 18 16:49:13 Lion nrpe[2935]: Listening for connections on port 5666
Nov 18 16:49:13 Lion nrpe[2935]: Allowing connections from: 127.0.0.1,::1,192.168.11.83
6.1.4 ファイアウォールでNRPEのポート5666/tcp,5666/udpを開く
# firewall-cmd --permanent --add-port=5666/tcp
# firewall-cmd --permanent --add-port=5666/udp
# firewall-cmd --reload
6.2 Nagios サーバー側の設定
6.2.1 commands.cfg編集
# vi /etc/nagios/objects/commands.cfg
# 最終行に追記
define command {
command_name check_nrpe
command_line $USER1$/check_nrpe -H $HOSTADDRESS$ -c $ARG1$
}
6.2.2 先ほどホスト追加したときに作成した korodes.cfg を編集追加する
今回はHTTP、SSH、FTP を追加してみる
# vi /etc/nagios/servers/korodes.cfg
# 以下を追加する
# 'HTTP' command definition
define service{
use local-service
host_name korodes
service_description HTTP
check_command check_http
}
# 'SSH' command definition
define service{
use local-service
host_name korodes
service_description SSH
check_command check_ssh
}
# 'FTP' command definition
define service{
use local-service
host_name korodes
service_description FTP
check_command check_ftp
}
6.2.3 Nagios 再起動
# systemctl restart nagios.service
6.2.4 http://[Nagios Server IP Address]/nagios にアクセスする
下図のように新しく追加した監視サービスが追加されている

