Click here for "Error Codes for Commercial Air Conditioners".(Japanese Version)

OracleLinux9.3 ; Initial settings after OS installation

1. Install bash completion extension package

2. Disabling SELinux

First, disable selinux. selinux is a feature that improves auditing and security in Linux, but when enabled, it can limit the behavior of services and the contents of the configuration considerably.
Therefore, it is basically a case of invalidation in many cases.
SELinux operating modes
Enforcing : SELinux functionality is enabled and access control is enabled
Permissive : SElinux will warn, but no access restrictions will be placed
disabled : Both SElinux function and access control are disabled
①Current SELinux status

②Switching to [permissive] mode

③Switch to [enforcing] mode

④To completely disable SELinux, a reboot is required by adding selinux=0 to the kernel command line as follows

※ To return SELinux to active, do the following (reboot after changes)

3. System Modernization

Update packages as soon as possible after OS installation.

4. Services to be stopped due to security measures

Stop the following services that you deem unnecessary.

5. Adding Repositories

5.1 Add EPEL repository and epel-next repository

5.2 Add Remi's RPM repository

6. Network configuration (command line configuration method)

6.1 Host Name Change

Change the host name to Lepard

6.2 Static IP address settingStatic IP address setting

If the default setting is to obtain an IP address via DHCP during OS installation, change the network settings to a fixed IP address if necessary.

First, find out the name of your network interface with the following command
This time it is "ens160"

In Oraclelinux8, this could be changed by rewriting the ifcfg-xxx file found in network-scripts, but in Oraclelinux9, the ifcfg format is deprecated and by default, NetworkManager will create new profiles in this format The "nmcli" command is no longer used to change it. Use the "nmcli" command to change it.
Change the static IPv4 address to "192.168.11.83".

7. Network configuration (how to configure via GUI)

7.1 Static IP address setting

If the default setting is to obtain an IP address via DHCP during OS installation, change the network settings to a fixed IP address if necessary. In this case, the network interface is named "ens160

Change the address of the IPv4 configuration

Use the TAB key to move to the bottom and click OK.

7.2 Host Name Change

Change the host name to Lepard

8. Vim Settings

①Installing Vim Extensions

②Apply and reflect Vim

③Configure Vim as a user-specific environment

Copied title and URL