Fedora37 ; FTP Server(Vsftpd) , File Server(Samba)

Contents

1.FTP Server Installation
- 1. 1 Vsftpd Install
- 1.2 Vsftpd configuration
2. vsftpd SSL/TLS
- 2.1 Create self-signed certificates
- 2.2 Vsftpd Configuration
3. File server installation with Samba

1.FTP Server Installation

1. 1 Vsftpd Install

# dnf -y install vsftpd

1	# dnf -y install vsftpd

1.2 Vsftpd configuration

Save the unedited vsftpd.conf with .bak

# cp /etc/vsftpd/vsftpd.conf /home/huong/vsftpd.conf.bak

1	# cp /etc/vsftpd/vsftpd.conf /home/huong/vsftpd.conf.bak

①Edit configuration file

# vi /etc/vsftpd/vsftpd.conf

●Line 12: Anonymous login prohibited (confirmation)
anonymous_enable=NO
●Line 39: Log transfer record (confirmation)
xferlog_enable=YES
●Lines 82,83 Uncomment ( Allow transfer in ASCII mode )
ascii_upload_enable=YES
ascii_download_enable=YES
●Lines 100,101: Uncomment ( chroot enabled )
chroot_local_user=YES
chroot_list_enable=YES
●Line 103 Uncomment ( chroot list file specified )
chroot_list_file=/etc/vsftpd/chroot_list
●Line 109 Uncomment ( Enable batch transfer by directory )
ls_recurse_enable=YES
●Line 114 Change ( Enable IPv4 )
listen=YES
●Line 123 Change (IPv6 is ignored)
listen_ipv6=NO
### Add to last line ###
# Use local time
use_localtime=YES

# vi /etc/vsftpd/vsftpd.conf

●Line 12: Anonymous login prohibited (confirmation)

anonymous_enable=NO

●Line 39: Log transfer record (confirmation)

xferlog_enable=YES

●Lines 82,83 Uncomment ( Allow transfer in ASCII mode )

ascii_upload_enable=YES

ascii_download_enable=YES

●Lines 100,101: Uncomment ( chroot enabled )

chroot_local_user=YES

chroot_list_enable=YES

●Line 103 Uncomment ( chroot list file specified )

chroot_list_file=/etc/vsftpd/chroot_list

●Line 109 Uncomment ( Enable batch transfer by directory )

ls_recurse_enable=YES

●Line 114 Change ( Enable IPv4 )

listen=YES

●Line 123 Change (IPv6 is ignored)

listen_ipv6=NO

### Add to last line ###

# Use local time

use_localtime=YES

②Add users to allow directory access to upper level

# echo "huong" >> /etc/vsftpd/chroot_list
In my case I wrote "huong".

1 2	# echo "huong" >> /etc/vsftpd/chroot_list In my case I wrote "huong".

③Specify IP addresses to allow connections in /etc/hosts.allow

# echo "vsftpd:192.168.11.0/24" >> /etc/hosts.allow
"192.168.11.0/24" is the setting that allows all local IP addresses in my environment.

1 2	# echo "vsftpd:192.168.11.0/24" >> /etc/hosts.allow "192.168.11.0/24" is the setting that allows all local IP addresses in my environment.

Write vsftpd:ALL (deny all connections) in /etc/hosts.deny

# echo "vsftpd:ALL" >> /etc/hosts.deny

1	# echo "vsftpd:ALL" >> /etc/hosts.deny

This setting overrides hosts.allow.
That is, everything is denied, and the IP address specified in hosts.allow is allowed

④Enable vsftpd autostart and start it

# systemctl enable vsftpd
Created symlink /etc/systemd/system/multi-user.target.wants/vsftpd.service → /usr/lib/systemd/system/vsftpd.service

# systemctl start vsftpd

# systemctl enable vsftpd

Created symlink /etc/systemd/system/multi-user.target.wants/vsftpd.service → /usr/lib/systemd/system/vsftpd.service

# systemctl start vsftpd

⑤From windows side, check if you can connect with FileZilla.
Open the ftp port with firewall before connecting

# firewall-cmd --permanent --add-service=ftp
# firewall-cmd --reload

1 2	# firewall-cmd --permanent --add-service=ftp # firewall-cmd --reload

Start FileZilla and select "Site Manager" from the "File" menu.

Click on "New site"

Enter the following settings for each item and click "Connect"
Protocol　: FTP-File Transfer Protocol
Host　: Server IP Address
Port　:can be blank
Encryption　: Use expllict FTP ocver TLS if available
Logon Type　: Ask for password
User 　: General user name (server login user)

Set the password for the login user in "Password" and click "OK".

Click "OK" when the following screen appears

If the connection is successful, the server directory is displayed on the right and the Windows directory on the left.

2. vsftpd SSL/TLS

Configure Vsftpd to use SSL/TLS

2.1 Create self-signed certificates

This work is not required if you are using a trusted, legitimate certificate such as Let's Encrypt.

# cd /etc/pki/tls/certs
# openssl req -x509 -nodes -newkey rsa:2048 -keyout /etc/pki/tls/certs/vsftpd.pem -out /etc/pki/tls/certs/vsftpd.pem
Generating a RSA private key
........................+++++
..................+++++
writing new private key to '/etc/pki/tls/certs/vsftpd.pem'
-----
You are about to be asked to enter information that will be incorporated
into your certificate request.
What you are about to enter is what is called a Distinguished Name or a DN.
There are quite a few fields but you can leave some blank
For some fields there will be a default value,
If you enter '.', the field will be left blank.
-----
Country Name (2 letter code) [XX]:JP #country code
State or Province Name (full name) []:Osaka # Region (Prefecture)
Locality Name (eg, city) [Default City]:Sakai # city
Organization Name (eg, company) [Default Company Ltd]:private # Organization Name
Organizational Unit Name (eg, section) []:Admin # Organization Name
Common Name (eg, your name or your server's hostname) [] Lepard # Server Host Name
Email Address []: # Administrator's email address

# cd /etc/pki/tls/certs

# openssl req -x509 -nodes -newkey rsa:2048 -keyout /etc/pki/tls/certs/vsftpd.pem -out /etc/pki/tls/certs/vsftpd.pem

Generating a RSA private key

........................+++++

..................+++++

writing new private key to '/etc/pki/tls/certs/vsftpd.pem'

-----

You are about to be asked to enter information that will be incorporated

into your certificate request.

What you are about to enter is what is called a Distinguished Name or a DN.

There are quite a few fields but you can leave some blank

For some fields there will be a default value,

If you enter '.', the field will be left blank.

-----

Country Name (2 letter code) [XX]:JP #country code

State or Province Name (full name) []:Osaka # Region (Prefecture)

Locality Name (eg, city) [Default City]:Sakai # city

Organization Name (eg, company) [Default Company Ltd]:private # Organization Name

Organizational Unit Name (eg, section) []:Admin # Organization Name

Common Name (eg, your name or your server's hostname) [] Lepard # Server Host Name

Email Address []: # Administrator's email address

# chmod 600 vsftpd.pem

1	# chmod 600 vsftpd.pem

2.2 Vsftpd Configuration

# vi /etc/vsftpd/vsftpd.conf

# Add to the last line：SSL/TLS Enable
rsa_cert_file=/etc/pki/tls/certs/vsftpd.pem
ssl_enable=YES
force_local_data_ssl=YES
force_local_logins_ssl=YES

If Firewalld is enabled, allow passive ports
● Add to the last line
# Fixed passive ports in any range of ports
pasv_enable=YES
pasv_min_port=60000
pasv_max_port=60100

# vi /etc/vsftpd/vsftpd.conf

# Add to the last line：SSL/TLS Enable

rsa_cert_file=/etc/pki/tls/certs/vsftpd.pem

ssl_enable=YES

force_local_data_ssl=YES

force_local_logins_ssl=YES

If Firewalld is enabled, allow passive ports

● Add to the last line

# Fixed passive ports in any range of ports

pasv_enable=YES

pasv_min_port=60000

pasv_max_port=60100

# systemctl restart vsftpd

1	# systemctl restart vsftpd

Allow passive ports in Firewalld

# firewall-cmd --add-port=60000-60100/tcp --permanent
success
# firewall-cmd --reload
success

# firewall-cmd --add-port=60000-60100/tcp --permanent

success

# firewall-cmd --reload

success

When connecting to FileZilla, the following screen appears, check the box and click "OK" to connect as described above.

3. File server installation with Samba

Build a file server with access rights that requires user authentication with Samba.
Installation Procedure
① Create shared folders with access rights that require user authentication
②Creation of accessible groups
③Creation of users belonging to groups that can be accessed
④Configuration File Editing

3.1 samba Install

# dnf install samba samba-client samba-common -y

1	# dnf install samba samba-client samba-common -y

3.2 Create a shared folder (smbshare)

# mkdir /home/smbshare

1	# mkdir /home/smbshare

3.3 Create accessible groups (smbgroup)

# groupadd smbgroup
# chgrp smbgroup /home/smbshare
# chmod 770 /home/smbshare

# groupadd smbgroup

# chgrp smbgroup /home/smbshare

# chmod 770 /home/smbshare

3.4 Configuration File Editing

# vi /etc/samba/smb.conf

# Lines 11-12 :
        unix charset = UTF-8  # add
        dos charset = CP932   # add
        workgroup = SAMBA
        security = user
        # add (Allow access only from the inside)
        hosts allow = 127. 192.168.11.
# Add to the last line
# Set any share name
[Smbshare]
        # Set any share name
        path = /home/smbshare
        # Allow Write
        writable = yes
        # Do not allow guest users
        guest ok = no
        # [smbgroup] Grant access only to groups
        valid users = @smbgroup
        # Set [smbgroup] as the group for file creation
        force group = smbgroup
        # Set file creation permissions to [770].
        force create mode = 770
        # Set permissions to [770] when creating folders
        force directory mode = 770
        # Inherit permissions of upper folders
        inherit permissions = yes

# vi /etc/samba/smb.conf

# Lines 11-12 :

unix charset = UTF-8 # add

dos charset = CP932 # add

workgroup = SAMBA

security = user

# add (Allow access only from the inside)

hosts allow = 127. 192.168.11.

# Add to the last line

# Set any share name

[Smbshare]

# Set any share name

path = /home/smbshare

# Allow Write

writable = yes

# Do not allow guest users

guest ok = no

# [smbgroup] Grant access only to groups

valid users = @smbgroup

# Set [smbgroup] as the group for file creation

force group = smbgroup

# Set file creation permissions to [770].

force create mode = 770

# Set permissions to [770] when creating folders

force directory mode = 770

# Inherit permissions of upper folders

inherit permissions = yes

3.5 SMB auto-start setup and restart

# systemctl enable smb
Created symlink /etc/systemd/system/multi-user.target.wants/smb.service → /usr/lib/systemd/system/smb.service.

# systemctl start smb

# systemctl enable smb

Created symlink /etc/systemd/system/multi-user.target.wants/smb.service → /usr/lib/systemd/system/smb.service.

# systemctl start smb

3.6 User (smbuser) registration, password setting, group registration

# useradd smbuser
# smbpasswd -a smbuser
New SMB password:     # Password Setting
Retype new SMB password:
Added user smbuser.

# usermod -aG smbgroup smbuser

# useradd smbuser

# smbpasswd -a smbuser

New SMB password: # Password Setting

Retype new SMB password:

Added user smbuser.

# usermod -aG smbgroup smbuser

3.7 Firewalld allows Samba services

# firewall-cmd --add-service=samba --permanent
success
# firewall-cmd --reload
success

# firewall-cmd --add-service=samba --permanent

success

# firewall-cmd --reload

success

3.8 Accessing shared directories from Windows 11

①Enable SMB1.0/CIFS in Windows as a preliminary preparation
To enable it, open "Moe Windows features" at the bottom of "Apps" and "Optional features" in the "Settings" menu of Windows, and check "SMB1.0/CIFS File Sharing Support" as shown below. Enable it.

②Connect from Windows Explorer
Open File Explorer and enter "\\" (in this case 192.168.11.83) in the address field.
Access the server.

Enter authentication information
User name　:　User name created in "3.6 User (smbuser) Registration, Password Setting, Group Registration
Password　 :　Password for the above user
Click "OK"

Confirm that files and folders are newly created when the shared directory information is displayed.

Go to top