OracleLinux10.2 : Tripwire , Logwatch , DNS更新 , ディスク使用率チェックスクリプト

Contents

Tripwire

1.インストール

# dnf -y install tripwire
Installed:
  tripwire-2.4.3.7-20.el10_2.x86_64

Complete!

2.パスフレーズ設定

サイトパスフレーズとローカルパスフレーズを設定する

# tripwire-setup-keyfiles

------------------------------------------------
The Tripwire site and local passphrases are used to sign a variety of
files, such as the configuration, policy, and database files.

Passphrases should be at least 8 characters in length and contain both
letters and numbers.

See the Tripwire manual for more information.
------------------------------------------------
Creating key files…

(When selecting a passphrase, keep in mind that good passphrases typically
have upper and lower case letters, digits and punctuation marks, and are
at least 8 characters in length.)

Enter the site keyfile passphrase: [site pass]
Verify the site keyfile passphrase: [site pass]
Generating key (this may take several minutes)…Key generation complete.

(When selecting a passphrase, keep in mind that good passphrases typically
have upper and lower case letters, digits and punctuation marks, and are
at least 8 characters in length.)

Enter the local keyfile passphrase: [local pass]
Verify the local keyfile passphrase: [local pass]
Generating key (this may take several minutes)…Key generation complete.

------------------------------------------------
Signing configuration file…
Please enter your site passphrase: [site pass]
Wrote configuration file: /etc/tripwire/tw.cfg

A clear-text version of the Tripwire configuration file:
/etc/tripwire/twcfg.txt
has been preserved for your inspection. It is recommended that you
move this file to a secure location and/or encrypt it in place (using a
tool such as GPG, for example) after you have examined it.

------------------------------------------------
Signing policy file…
Please enter your site passphrase: [site pass]
Wrote policy file: /etc/tripwire/tw.pol

A clear-text version of the Tripwire policy file:
/etc/tripwire/twpol.txt
has been preserved for your inspection. This implements a minimal
policy, intended only to test essential Tripwire functionality. You
should edit the policy file to describe your system, and then use
twadmin to generate a new signed copy of the Tripwire policy.

Once you have a satisfactory Tripwire policy file, you should move the
clear-text version to a secure location and/or encrypt it in place
(using a tool such as GPG, for example).

Now run "tripwire --init" to enter Database Initialization Mode. This
reads the policy file, generates a database based on its contents, and
then cryptographically signs the resulting database. Options can be
entered on the command line to specify which policy, configuration, and
key files are used to create the database. The filename for the
database can be specified as well. If no options are specified, the
default values from the current configuration file are used.

3.Tripwire の設定

①設定ファイル編集

# vi /etc/tripwire/twcfg.txt

9 行目 : 変更
LOOSEDIRECTORYCHECKING =true

12 行目 : 変更(レベル4 にすることで「0 」～「4 」までの5 段階中、最も詳細なレポートが表示されます)
REPORTLEVEL =4

②Tripwire 設定ファイル(暗号署名版)を作成

# twadmin -m F -c /etc/tripwire/tw.cfg -S /etc/tripwire/site.key /etc/tripwire/twcfg.txt
Please enter your site passphrase: ←site pass
Wrote configuration file: /etc/tripwire/tw.cfg

③Tripwire 設定ファイル(テキスト版)削除

# rm -f /etc/tripwire/twcfg.txt

④ポリシーファイル設定

# cd /etc/tripwire/
# vi twpolmake.pl

twpolmake.plの内容

#!/usr/bin/perl
#
$POLFILE=$ARGV[0];

open(POL,"$POLFILE") or die "open error: $POLFILE" ;
my($myhost,$thost) ;
my($sharp,$tpath,$cond) ;
my($INRULE) = 0 ;

while (<POL>) {
chomp;
if (($thost) = /^HOSTNAME\s*=\s*(.*)\s*;/) {
$myhost = `hostname` ; chomp($myhost) ;
if ($thost ne $myhost) {
$_="HOSTNAME=\"$myhost\";" ;
}
}
elsif ( /^{/ ) {
$INRULE=1 ;
}
elsif ( /^}/ ) {
$INRULE=0 ;
}
elsif ($INRULE == 1 and ($sharp,$tpath,$cond) = /^(\s*\#?\s*)(\/\S+)\b(\s+->\s+.+)$/) {
$ret = ($sharp =~ s/\#//g) ;
if ($tpath eq '/sbin/e2fsadm' ) {
$cond =~ s/;\s+(tune2fs.*)$/; \#$1/ ;
}
if (! -s $tpath) {
$_ = "$sharp#$tpath$cond" if ($ret == 0) ;
}
else {
$_ = "$sharp$tpath$cond" ;
}
}
print "$_\n" ;
}
close(POL) ;

⑤ポリシーファイル最適化

# perl /etc/tripwire/twpolmake.pl /etc/tripwire/twpol.txt > /etc/tripwire/twpol.txt.new

⑥最適化済ポリシーファイルを元に、ポリシーファイル(暗号署名版)作成

# twadmin -m P -c /etc/tripwire/tw.cfg -p /etc/tripwire/tw.pol -S /etc/tripwire/site.key /etc/tripwire/twpol.txt.new
Please enter your site passphrase: ←site pass

⑦データベースを作成、動作確認

# tripwire -m i -s -c /etc/tripwire/tw.cfg
Please enter your local passphrase: ←local pass

テスト用ファイルを作成

# echo test > /root/test.txt

Tripwire の動作確認

# tripwire -m c -s -c /etc/tripwire/tw.cfg

下記のように表示される
Open Source Tripwire(R) 2.4.3.7 Integrity Check Report

Report generated by:          root
Report created on:            Sun 19 Jul 2026 04:44:40 PM JST
Database last updated on:     Never

===============================================================================
Report Summary:
===============================================================================

(Omitted)

-------------------------------------------------------------------------------

Added:
"/root/test.txt"

===============================================================================
Error Report:
===============================================================================

No Errors

-------------------------------------------------------------------------------
*** End of report ***

Open Source Tripwire 2.4 Portions copyright 2000-2018 Tripwire, Inc.  Tripwire is a registered
trademark of Tripwire, Inc. This software comes with ABSOLUTELY NO WARRANTY;
for details use --version. This is free software which may be redistributed
or modified only under certain conditions; see COPYING for details.
All rights reserved.

テスト用ファイルを削除

# rm -f /root/test.txt

⑧Tripwire メールで結果報告用スクリプト作成

# cd /var/www/system
# vi tripwire.sh

tripwire.shの内容

#!/bin/bash

PATH=/usr/sbin:/usr/bin:/bin:/usr/local/tripwire/sbin

# パスフレーズ設定
LOCALPASS=xxxxx # local pass
SITEPASS=xxxxx # site pass

#通知先メールアドレス指定
MAIL="your mailaddress "

cd /etc/tripwire

# Tripwireチェック実行
tripwire -m c -s -c tw.cfg|mail -s "Tripwire(R) Integrity Check Report in `hostname`" $MAIL

# ポリシーファイル最新化
twadmin -m p -c tw.cfg -p tw.pol -S site.key > twpol.txt
perl twpolmake.pl twpol.txt > twpol.txt.new
twadmin -m P -c tw.cfg -p tw.pol -S site.key -Q $SITEPASS twpol.txt.new > /dev/null
rm -f twpol.txt* *.bak

# データベース最新化
rm -f /usr/local/tripwire/lib/tripwire/*.twd*
tripwire -m i -s -c tw.cfg -P $LOCALPASS

# chmod 700 tripwire.sh

定期的に実行するためcronに設定

# crontab -e
0 3 * * * /var/www/system/tripwire.sh

下記コマンドを実行し、指定したメールアドレスに実行結果が通知されることを確認

# /var/www/system/tripwire.sh

Logwatch

Logwatchとは、各種ログファイルを分析し、Logを見やすい形にしてくれるツールです。インストールすれば、Cronジョブとして登録され毎日実行されます。また結果をメールで送信することも可能です。

①インストール

# dnf -y install logwatch

②設定ファイルの編集

# cat /usr/share/logwatch/default.conf/logwatch.conf >> /etc/logwatch/conf/logwatch.conf

# vi /etc/logwatch/conf/logwatch.conf

77 行目あたりに結果を通知するメールアドレスを追加
#MailTo = root
MailTo = [メールアドレス]

116行目あたりログ通知の詳細度を設定
#Detail = Low
Detail = High

③Logwatch のレポートを出力

# logwatch --output stdout

下記のようなメッセージが出ます

 ################### Logwatch 7.11 (07/22/24) #################### 
        Processing Initiated: Sun Jul 19 17:03:26 2026
        Date Range Processed: yesterday
                              ( 2026-Jul-18 )
                              Period is day.
        Detail Level of Output: 10
        Type of Output/Format: stdout / text
        Logfiles for Host: Lepard
 ##################################################################

 --------------------- Kernel Audit Begin ------------------------

  Number of audit daemon starts: 1

  Number of audit initializations: 1

 **Unmatched Entries**
    auditd[1048]: audit dispatcher initialized with q_depth=2000 and 1 active plugins: 1 Time(s)

 ---------------------- Kernel Audit End -------------------------

----------------------------------(Omitted)--------------------------------------------

--------------------- Disk Space Begin ------------------------

 Filesystem           Size  Used Avail Use% Mounted on
 /dev/mapper/ol-root   34G  9.0G   25G  27% /
 efivarfs             256K   81K  171K  33% /sys/firmware/efi/efivars
 /dev/nvme0n1p2       2.0G  434M  1.6G  22% /boot
 /dev/nvme0n1p1       599M  9.1M  590M   2% /boot/efi


 ---------------------- Disk Space End -------------------------


 --------------------- lm_sensors output Begin ------------------------

 nvme-pci-0b00
 Adapter: PCI adapter
 Composite:    +29.9 C


 ---------------------- lm_sensors output End -------------------------


 ###################### Logwatch End #########################

④設定したアドレスにレポートが届くかテストを行います。上記の様なログレポートメールが届いているか確認

# /etc/cron.daily/0logwatch

DNS更新

ネットが切断されたり、ルーターが切断再起動したときにおこるグローバルIPの変更の度に、ダイナミックDNSにアクセスしグローバルIPが変更されたことを知らせなくてはいけません。
その作業を自動的にやってくれるのがDiCEでしたがOracleLinux10では32bitソフトを使用できなくなりましたので専用のpythonファイルを作成しCronで定期実行します(今回はValudomainでのDNS設定です)

# cd /var/www/system
# vi ddnsset.py

ddnsset.pyの内容

#setddns.py
import requests
import ipaddress
from datetime import datetime
from pathlib import Path

# SETTING DATA
MY_DOMAIN = "example.jp"  ←自ドメイン
MY_PASS = "xxxxxxxxxx"　←パスワード
MY_HOSTNAME = "xxxx"　←ホスト名
OUT_FILE = Path("/tmp/ipadress") ←IPアドレス記録ファイル

def time_msg():
    now = datetime.now()
    return now.strftime("%Y/%m/%d %H:%M:%S")

def is_valid_ip(ip_str):
    try:
        ipaddress.ip_address(ip_str)
        return True
    except ValueError:
        return False

def main():
    # Check Global IP Address
    url_get_ip = "https://dyn.value-domain.com/cgi-bin/dyn.fcg?ip"
    try:
        response = requests.get(url_get_ip, timeout=10)
        response.raise_for_status()
        current_ip = response.text.strip()
    except requests.RequestException as e:
        print(f"{time_msg()} Failed to get IP: {e}")
        return

    # IP check
    mssg = time_msg()
    if not current_ip:
        print(f"{mssg} invalid IP NULL")
        return

    if not is_valid_ip(current_ip):
        print(f"{mssg} invalid IP={current_ip}")
        return

    # Read previous IP
    previous_ip = ""
    if OUT_FILE.exists():
        with open(OUT_FILE, "r") as f:
            previous_ip = f.read().strip()

    if current_ip == previous_ip:
        print(f"{time_msg()} no change IP={current_ip}")
        return
    else:
        print(f"change IP from {previous_ip} to {current_ip}")

    # Update DDNS
    mssg = time_msg()
    print(f"{mssg} access to value-domain")

    url_set_ddns = (
        f"https://dyn.value-domain.com/cgi-bin/dyn.fcg?"
        f"d={MY_DOMAIN}&p={MY_PASS}&h={MY_HOSTNAME}"
    )

    try:
        response = requests.get(url_set_ddns, timeout=10)
        response.raise_for_status()
        # 改行をスペースに変換し、連続するスペースを1つにまとめる
        result = ' '.join(response.text.strip().split())
    except requests.RequestException as e:
        print(f"{time_msg()} Failed to update DDNS: {e}")
        return

    mssg = time_msg()
    print(f"{mssg} {MY_HOSTNAME}.{MY_DOMAIN} {result} IP={current_ip}")

    # DDNS更新が成功した場合のみIPを保存
    if "status=0" in result:
        with open(OUT_FILE, "w") as f:
            f.write(current_ip)
        print(f"{mssg} Successfully saved new IP: {current_ip}")
    else:
        print(f"{mssg} DDNS update failed, IP not saved")

if __name__ == "__main__":
    main()

IPアドレス記録ファイル作成

# touch /tmp/ipadress

定期的に実行

# crontab -e

* 00 * * * /usr/bin/python3 /var/www/system/ddnsset.py >> /var/log/ddns_updater.log 2>&1

ディスク使用率チェックスクリプト

1. スクリプト作成

# cd /var/www/system
# vi disk_capacity_check.sh

disk_capacity_check.shの内容

#!/bin/bash

#通知先メールアドレス指定
MAIL="your mailaddress"

DVAL=`/bin/df / | /usr/bin/tail -1 | /bin/sed 's/^.* \([0-9]*\)%.*$/\1/'`

if [ $DVAL -gt 80 ]; then
echo "Disk usage alert: $DVAL %" | mail -s "Disk Space Alert in `hostname`" $MAIL
fi

# chmod 700 disk_capacity_check.sh

2. 実行確認

①現在の使用率を確認

# df -h

次のように表示される
Filesystem           Size  Used Avail Use% Mounted on
/dev/mapper/ol-root   34G  8.9G   25G  27% /
devtmpfs             4.0M     0  4.0M   0% /dev
tmpfs                1.7G     0  1.7G   0% /dev/shm
efivarfs             256K   81K  171K  33% /sys/firmware/efi/efivars
tmpfs                692M  9.2M  683M   2% /run
tmpfs                1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
/dev/loop0            51M   51M     0 100% /var/lib/snapd/snap/snapd/27406
/dev/loop2            67M   67M     0 100% /var/lib/snapd/snap/core24/1643
/dev/loop1            74M   74M     0 100% /var/lib/snapd/snap/certbot/5758
/dev/nvme0n1p2       2.0G  434M  1.6G  22% /boot
/dev/nvme0n1p1       599M  9.1M  590M   2% /boot/efi
tmpfs                1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs                346M   16K  346M   1% /run/user/1000

②使用率80%以上になるようダミーファイルを作成(例ではdummyfile という名前で20G程度)

# dd if=/dev/zero of=dummyfile bs=1M count=20000

③再度確認
下記を実行して80%以上になっていることを確認

# df -h

④ディスク容量チェックスクリプトを実行

# /var/www/system/disk_capacity_check.sh

設定したメールアドレスに本文の内容として「Disk usage alert: 86 %」のように記載のメールが届きます

⑤作成した「dummyfile」を削除

# rm -f dummyfile

⑥定期実行設定

# crontab -e

下記追加
30 2 * * * /var/www/system/disk_capacity_check.sh

ページのトップへ

WordPressが利用できる代表的なレンタルサーバー